Znz Boat EVA Foam Teak Floor Decking Sheet, Self-Adhesive Teak Decking Mat, Non-Slip Boat Flooring Decking Pad for Marine Boat

Product Description

Product Description

Material	EVA
Size	15.98×5.67×5.43inches etc
Color	Black+Brown
Weight	0.67kgs
MOQ	500
Packing	Rolled
Characteristic	International test proved

 

 

Production Function

 

* NON-SLIPPERY SURFACE: Non-skid EVA Foam Faux Teak Sheets provide Self-unparalleled comfort and exceptional traction. Shock resistance non-slip, corrosion-resistant, soft and comfortable, not easy to deform, and no odor and toxicity. Not easy to tear or damage.
* HIGH QUALITY: This marine mat uses a EVA foaming material, EVA has advantages of good cushioning, heat insulation, non-skid, salt water proof. Airtight bubble pore structure, non-absorbent, perfect waterproof performance. High resilience and resistance to tension, strong toughness, fine shockproof and cushioning performance. Length: 94inch/ 240 cm; Width: 15.5inch/ 38cm; Thickness: 0.23inch/ 6mm.
* EASY INSTALLTION:This boat floor decking sheet has the look of teak without difficult installation, costs and maintenance required for real wood. Self-adhesive Decking Pad with strong glue at the back, the strength glue can make you less trouble. can easily be cut down to fit nearly any surface on a boat where non-skid,or protection for the boat's surface is required.
* EASY TO CLEAN: EVA Foam is a material which is soft ,non-toxic ,odourless and stain resistance. It can be washed with vacuum cleaner, broom, dry/wet mop or be pressure washed. It is natural and comfortable.

 

 

Product Application

MULTIPURPOSE: Has wide applications, this boat marine flooring mat is suitable for yacht flooring, boat flooring, RV flooring, car flooring, swimming pool flooring, garden flooring and other decoration. It can be installed independently by DIY and easy to operate.

 

 

Installation

* Step 1: Start by you plan to work with your plastic sheets, an indelible marker and instructions to create a pattern that you make the production of your nonskid deck.
* Step 2: EVA foam nonskid can be installed on metal or fiberglass decks, even those with existing nonskid patterns, but the deck must be clean and free of grease, dust and other contaminants. Just before you install the nonskid, scrub the deck with a stiff-bristle brush and soap and water, rinse thoroughly, and then dry it with a towel to eliminate water spots. Finally, wipe down each section of the deck with denatured alcohol to ensure a clean mounting surface.
* Step 3: Peel-and-stick, pressure-sensitive adhesive backing makes installation easy and creates a strong bond. Position each section of nonskid and tape it in place. Then lift one corner slightly, peel away a bit of the backing, and lay the corner back down. Do this again to an adjacent corner. Now remove the positioning tape, lift the opposite side, slowly peel away the backing (beginning at the two corners you just laid down), and lay down the rest of the nonskid. Press firmly to fully activate the adhesive.

 

FAQ

1, What's your MOQ?
500m/design 

2, Are free sample available?
Yes, but express delievry cost is to be collected

3, What is the delivery time?
Mass order: 30-45days after received deposit
Sample order: 10-15days

4, Can you produce goods according to the samples which supplied by customers?
Yes, we can produce goods according to your samples

5, What is the payment term?
30% TT in advance, 70% after see the copy of Bill of Lading

6, What certificates do you have?
BSCI, SGS, REACH, ALS, etc